Crane Signage – Haydn & Rollett

New lettering and wiring up onto support rails and than attached on to jib boom. This job took around 1/2 a day from start to finish with 3 of our installers with various skill levels working together.

Building Signage – Snap Fitness

Install signage as per customer instructions. Total rebrand, including wall graphics, building signage, internal and wayfinding signage.

LED Signage – Mercedes Benz Auckland

NCI completed a rebrand of the Auckland franchises, this involved in house assembly, wiring of LED’s and a lot of planning both on and off site, along with transportation of all signage and on site installation using NCI and out sourced access equipment.

Signage & Window Graphics – NZ Police

NZ Police Waikato region was recently re-imaged. NCI installed all premade signage supplied by Torque which included way finding, fascia, road side plinths and window graphics. There was a specific target to meet for this and NCI was able to deliver on time with quality results.

Signage – Waitemata & Auckland DHB

NCI has worked closely with its partners to give the hospital signage an upgrade, both externally and internally. This project spanned out over several stages, and involved a lot of aspects, including night works, working at heights and road traffic management. This project was fully project managed by NCI.

LED Illuminated Signage – Bad Times at the El Royale

NCI installed signage onto a bus stop in Auckland city. A job like this in the city needed a few things before being able to install. Traffic management Hiab truck and driver Installing team of 4 which consisted of Hiab truck and driver to lift sign, 1 spotter to make sure all health and safety […]

Signage – Unitec

Part 1 was to apply new vinyl graphics to top angled windows: This required use of a 20m boom lift which our senior installers were harnessed into as they applied drop by drop. Part 2: Lift House Signs: Install printed pvc vinyl banner skins to 4 x existing plywood panels 3000mmh x 2400mmw Western face […]